Linkedin Instagram Facebook

Welding lines for the production of reinforcing mesh

Equipment
& Machinery

EVG > Welding lines for the production of reinforcing mesh

ATT RV/HS

Welding lines for the efficient production of standard reinforcing mesh in medium to large lot sizes
  • Automatic and highly dynamic feeding of wires from coils
  • Top production speeds at single cross wire welding lines
  • Single-point welding without the necessity to change over current bridges when changing the line wire spacing
  • ATT automatically feeds cross wires above and below the line wires, eliminating the sheet turning process 
Inquire

ATT + RA-XE

Flexible welding lines for the production of standard and engineered reinforcing sheets from small lot sizes to large-scale production orders
  • Automatic feeding of line wires from coils via a logistically synchronized multi-track rotor straightening machine of type RA-XE with single or double wire feed, equipped with up to 10 rotors
  • Automatic feeding of cross wires from coils via a plant-specific multiple switch system
  • “Just-in-time” production of different sheet types and sheet geometries
  • High production speeds combined with minimum changeover times
  • ATT automatically feeds cross wires above and below the line wires, eliminating the sheet turning process
Inquire

ATT + PCX

Flexible welding lines for the production of standard and engineered reinforcing sheets from small lot sizes to large-scale production orders
  • Automatic feeding of line wires from coils via logistically synchronized Wire Straightening and Cutting Machine(s) of type POLYCUT PCX
  • Automatic feeding of cross wires from coils via a plant-specific multiple switch system
  • “Just-in-time” production of different sheet types and sheet geometries
  • High production speeds combined with minimal changeover times
  • ATT automatically feeds cross wires above and below the line wires, eliminating the sheet turning process
Inquire

ATT 2C

Double-throw welding lines for the high-volume production of standard reinforcing mesh
  • Automatic and highly dynamic feeding of two cross wires simultaneously from coils
  • Top production output with up to 350 cross wires per minute
  • Perfect equipment for small and mid-size wire diameters
  • ATT automatically feeds cross wires above and below the line wires, eliminating the sheet turning process
Inquire

GD 6

Double-throw welding lines for the high-volume production of standard reinforcing mesh
  • Automatic and highly dynamic feeding of two cross wires simultaneously from coils
  • Top production output with up to 300 cross wires per minute
  • Perfect equipment for small, mid-size and large wire diameters
Inquire

QC

Highly flexible welding lines for the production of special sheets and engineered fabric of any configuration
  • Line and cross wire feeding and working from bars
  • Automated production sequence and minimum times for changeover to infinitely variable line wire spacings
  • Top production output even in case of small lot sizes
Inquire

QC + RA-XE

Special configuration of highly flexible welding line of our QC series with feeding of wires from coils
  • Automatic feeding of line and cross wires from coils via logistically synchronized multi-track rotor straightening machines of type RA-XE
  • “Just-in-time” production of different sheet types and sheet geometries
  • Production of round sheets or sheets with a cut-out through flexible positioning of wires
Inquire

GE

Welding lines of different degrees of automation for the production of reinforcing steel sheets in small and medium lot sizes
  • Line wires can be fed either from coils or as bar material (manually or automatically)
  • Manual change-over to steplessly adjustable line wire spacings
  • Cross wires are fed via magazine with prestraightend bar material 
  • Scroll to the right
GE12 – LTPV*
GE 16 – LTPV*
GE12 – RV**
Max. welding width [mm]
2.600, 3.200, 3.600
2.600, 3.200, 3.600
2.600, 3.200
Line wire diameter [mm]
4 – 12
4 – 16
5 – 12
Line wire spacing [mm]
100, 150, 200
100, 150, 200
100, 150, 200
Cross wire diameter [mm]
4 – 12
4 – 16
5 – 12
Cross wire pitch [mm]
50 – 400
50 – 400
50 – 400
Max. working speed [CW/min]
120
120
130
* line wire bar material
** line wires from coils
The listed technical data refer to standard equipment, which can be adapted to individual customer requirements
Inquire

GE + RA-XE

Flexible special configuration of welding lines of GE series with line wires being fed from coils via a straightening machine
  • Automatic feeding of line wires from coils via a logistically synchronized multi-track rotor straightening machine of type RA-XE
  • “Just-in-time” production of different sheet types and sheet geometries
  • Cross wires are fed via magazine with prestraightend bar material
Inquire

G55 / G95

Welding lines for the efficient production of standard reinforcing mesh in medium to large lot sizes
  • Automatic and highly dynamic feeding of wires from coils
  • Top production speeds on single-step welding lines

  • Double point welding is perfect technology for thicker wire diameters”

Inquire

ERM-ECO

Highly flexible welding systems for the production of standard and special reinforcement mesh in the smallest batch sizes up to large production orders
  • Steplessly adjustable spacings of the line and cross bars – no grid, no restrictions on production output
  • No changeover times between the individual sheet types
  • Production of sheets with cutouts and almost any contours
  • Ingoing material in WR or CR quality – wire diameter from 5.0 mm to 16.0 mm
  • Fully automatic production with line and cross wires from coils with integrated rotor-type straightener
  • Novel medium frequency DC welding technology EVG-ECOWELD
  • Minimum space requirement
Inquire

CSM

Welding lines with different levels of automation for the production of column and strip mesh.
  • Feeding of line and cross wires from coils or as bar material
  • The highest stage of expansion the welding line has an integrated wire straightening machine and an automated line wire feeding system.
  • The mechanical design of the parts in the welding line is such that the machine can be converted in a few simple steps
Inquire

MBD

EVG Mesh Bender MB integrated in the ERM-ECO Welding Line for the fully automatic production of 3D reinforcing elements in smallest lot sizes
  • Extended ERM-ECO functionality with integrated sheet bending feature
  • No changeover times between individual sheet types and / or bent reinforcing elements / cages for just-in-time production
  • Automatic bending mandrel change
  • Easy-to-use software WIRE CAD and WIRE FLOW
MBD 12
MBD 16
Min. bended wire diameter [mm]
6
6
Max. bended wire diameter [mm]
12
16
Max. mesh length [mm]
6.000, 9.000, 12.000
6.000, 9.000, 12.000
Amount of bending lines
1 or 2
1 oder 2
Bending angle [°]
0-180
0-180
Min. bending mandrel spacing [mm]
50
50
Linkedin Instagram Facebook

Inquiry

Inquiry