Welding lines for the production of reinforcing mesh

ATT RV/HS

Welding lines for the efficient production of standard reinforcing mesh in medium to large lot sizes

Automatic and highly dynamic feeding of wires from coils
Top production speeds at single cross wire welding lines

Single-point welding without the necessity to change over current bridges when changing the line wire spacing
ATT automatically feeds cross wires above and below the line wires, eliminating the sheet turning process

ATT + RA-XE

Flexible welding lines for the production of standard and engineered reinforcing sheets from small lot sizes to large-scale production orders

Automatic feeding of line wires from coils via a logistically synchronized multi-track rotor straightening machine of type RA-XE with single or double wire feed, equipped with up to 10 rotors

Automatic feeding of cross wires from coils via a plant-specific multiple switch system
“Just-in-time” production of different sheet types and sheet geometries
High production speeds combined with minimum changeover times
ATT automatically feeds cross wires above and below the line wires, eliminating the sheet turning process

ATT + PCX

Flexible welding lines for the production of standard and engineered reinforcing sheets from small lot sizes to large-scale production orders

Automatic feeding of line wires from coils via logistically synchronized Wire Straightening and Cutting Machine(s) of type POLYCUT PCX
Automatic feeding of cross wires from coils via a plant-specific multiple switch system
“Just-in-time” production of different sheet types and sheet geometries
High production speeds combined with minimal changeover times
ATT automatically feeds cross wires above and below the line wires, eliminating the sheet turning process

ATT 2C

Double-throw welding lines for the high-volume production of standard reinforcing mesh

Automatic and highly dynamic feeding of two cross wires simultaneously from coils
Top production output with up to 350 cross wires per minute
Perfect equipment for small and mid-size wire diameters
ATT automatically feeds cross wires above and below the line wires, eliminating the sheet turning process

GD 6

Double-throw welding lines for the high-volume production of standard reinforcing mesh

Automatic and highly dynamic feeding of two cross wires simultaneously from coils
Top production output with up to 300 cross wires per minute
Perfect equipment for small, mid-size and large wire diameters

QC

Highly flexible welding lines for the production of special sheets and engineered fabric of any configuration

Line and cross wire feeding and working from bars
Automated production sequence and minimum times for changeover to infinitely variable line wire spacings
Top production output even in case of small lot sizes

QC + RA-XE

Special configuration of highly flexible welding line of our QC series with feeding of wires from coils

Automatic feeding of line and cross wires from coils via logistically synchronized multi-track rotor straightening machines of type RA-XE
“Just-in-time” production of different sheet types and sheet geometries
Production of round sheets or sheets with a cut-out through flexible positioning of wires

LSM

Welding lines of different degrees of automation for the production of reinforcing mesh strips (“ladders”).

Feeding of line and cross wires from coils or as bar material
Twist-free feeding of line wires from coils owing to the use of individual line wire shears before the welding reference line
Processing of different line wire diameters in one strip with welding pressure applied from below

GE

Welding lines of different degrees of automation for the production of reinforcing steel sheets in small and medium lot sizes

Line wires can be fed either from coils or as bar material (manually or automatically)
Manual change-over to steplessly adjustable line wire spacings
Cross wires are fed via magazine with prestraightend bar material

	GE12 – LTPV*	GE 16 – LTPV*	GE12 – RV**
Max. welding width [mm]	2.600, 3.200, 3.600	2.600, 3.200, 3.600	2.600, 3.200
Line wire diameter [mm]	4 – 12	4 – 16	5 – 12
Line wire spacing [mm]	100, 150, 200	100, 150, 200	100, 150, 200
Cross wire diameter [mm]	4 – 12	4 – 16	5 – 12
Cross wire pitch [mm]	50 – 400	50 – 400	50 – 400
Max. working speed [CW/min]	120	120	130

* line wire bar material

** line wires from coils

The listed technical data refer to standard equipment, which can be adapted to individual customer requirements

GE + RA-XE

Flexible special configuration of welding lines of GE series with line wires being fed from coils via a straightening machine

Automatic feeding of line wires from coils via a logistically synchronized multi-track rotor straightening machine of type RA-XE

“Just-in-time” production of different sheet types and sheet geometries
Cross wires are fed via magazine with prestraightend bar material

G55 / G95

Welding lines for the efficient production of standard reinforcing mesh in medium to large lot sizes

Automatic and highly dynamic feeding of wires from coils
Top production speeds on single-step welding lines
Double point welding is perfect technology for thicker wire diameters”

MPT

A fully automatic device for applying labels to a mesh pile with freely selectable contents.